<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
		<id>http://www.viewtool.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=HunterCrv5</id>
		<title>wiki - User contributions [en]</title>
		<link rel="self" type="application/atom+xml" href="http://www.viewtool.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=HunterCrv5"/>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Special:Contributions/HunterCrv5"/>
		<updated>2026-06-13T05:09:43Z</updated>
		<subtitle>User contributions</subtitle>
		<generator>MediaWiki 1.30.0</generator>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Prime_5_Greatest_Outdoor_Ping_Pong_Tables_2020_Trusted_Reviews&amp;diff=261783</id>
		<title>Prime 5 Greatest Outdoor Ping Pong Tables 2020 Trusted Reviews</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Prime_5_Greatest_Outdoor_Ping_Pong_Tables_2020_Trusted_Reviews&amp;diff=261783"/>
				<updated>2020-12-24T18:28:38Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: Created page with &amp;quot;&amp;lt;br&amp;gt; With the flexibility to are available in so many styles and sizes with limitless lengths, steel buildings provide you with the choice of storing classic vehicles, ping po...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&amp;lt;br&amp;gt; With the flexibility to are available in so many styles and sizes with limitless lengths, steel buildings provide you with the choice of storing classic vehicles, ping pong tables and more all within the identical construction. The conversion high has two metallic braces with wing-nut screws that hold the pieces collectively and line them up. Now, the precise origination of desk high video games is unknown, however the primary particular reference to a sport table is in 1470, when French King Louis XI owned a variation of a pool table. The very first step of cleaning your ping pong table is to take-off the net. Grab the online and attach it at the center of the desk by using clamps. Through the use of a superb paddle for apply, it shouldn't hold your progress again however to enhance it further. For casual gamers looking for an entry-level option, it’s very good value but it’s obtained two thinner surface to get our full blessing.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; You must know that the market worth value of a sure paddle does not determine its compatibility to your taking part in model. There are various cleaning agents for ping pong tables that are available available in the market at the moment. Congratulations, your ping pong table is now complete. On the whole, no! In table tennis, all of the pictures are &amp;quot;half-volley&amp;quot;! Do not just settle to those costly ping pong paddles just because they're the highest or the most popular brand. That means that an underground entertainment center won’t hassle somebody sleeping on the top flooring, even when you crank the subwoofer a bit. Try to make a healthier alternative each day whether or not it is including in a vegetable at lunch or spending 20 minutes enjoying tag together with your little brother instead of watching Tv. Slightly fence divides the 2 opposing sides. Mix the 2 components effectively for about 1 to 2 minutes and when it is finished, it can now be applied.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; When it is executed, you can even cover the opposite physique components of the table comparable to its legs, sides, bottom edges and corners. Once carried out, do the identical on the remaining components of the table. That is the most common fallacious notion to each new player of this desk sport. There are good high quality and cheaper paddles, but that is a very powerful tools a player will want within the sport. Not like different [https://www.angieslist.com essentials] for desk tennis, prices don’t necessarily dictate high quality. Any water will do; and don’t overdo it. You don’t want your table to lose its protection during the rain, right? It's the ball which makes a ping pong recreation fascinating but it is the paddle and table which cares for a ball. If your buddy is a greater desk tennis [https://www.dietspotlight.com participant] than you are then you should not base your decision to buy the identical kind of ping pong paddle that he use. So if your storage or storage room would not have sufficient room then you definitely would possibly consider renovating it.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; Your first priority is to make sure that the room should have sufficient spaces for the gamers to maneuver round their playing corners. As soon as that you've outlined your taking part in type and have developed your personal talent, this shall be the proper time to buy the acceptable paddle for you to use. Depending on your grip, the bottom of the paddle might be made flared, straight, or ergonomic. There are literally loads of incidents where the paddle can break apart. As talked about above (2), a foul paddle can't withstand speedy movements which has the tendency to break apart. It is because of this why you could rigorously select the appropriate paddle with the quality that means that you can carry out rapid movements. Assuming that you're privy to this bad high quality of your paddle, this makes you nervous to perform fast movement during which holds or prevents your progress for improvement.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; The use of &amp;quot;Natural Cleansing Solvents&amp;quot; are best advised over &amp;quot;Artificial Cleansing Solvents&amp;quot;. If the desk is closely being used frequently then it's best urged to scrub it after its last use of the day. Moreover, this table comes with a 1-12 months limited guarantee that assures you it could last for a lifetime. Whether you need to buy a tennis desk cowl, you build a ping pong table and are making the last changes or you're starting to take the game extra seriously and want to participate in competitions, that you must know the desk dimensions. Thus, you need to take the dimensional measurement of the table that you simply intend to purchase or build (acknowledged official ping pong table dimensions is 9 ft size by 5 ft huge) then, layout an imaginary measurement of the desk at the center of the room and test if there's enough house for the gamers movements. Earlier than you intend to buy or build your personal ping pong table, it is necessary that you have already got an appropriate room for it. It's resulting from this cause why it is really essential that the room should have enough house.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; And on the sides, the house have to be at least 4 to 5 ft. In any other case, you can take advantage of the outside space by getting an out of doors table tennis setup. Once you have your desk tennis table set up, the web adjusted and a wholesome provide of additional balls you may play desk tennis whenever you need. As soon as unscrewed, now you can take away the online. If you would like to save lots of cash, you may truly use a mixture of water and vinegar. But simply just like the step on quantity 2, an alternative methodology is to make use of a mixture of an equal quantity of water and vinegar. What you need to do is to fill a container with an &amp;quot;equal&amp;quot; amount of water and vinegar. I didn’t really want to follow the run of the mill teams, and that i wanted to have a group that was extra center of the desk, that would give me the [https://www.gloucestercitynews.net/clearysnotebook/2018/02/cnb-business-news-whats-in-the-neighborhood-fishtown-and-the-river-wards.html More Information and facts] emotional rollercoaster moments - to be sincere, now wanting again, that was a nasty idea. Shopping for a ping pong paddle on-line and simply relying on the customer's suggestions will not be such a good idea as a result of you won't be capable to perform your exams.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; The primary importance of a superb ping pong paddle is that, it provides the participant a greater performance allowing him to strike the ball at his personal most popular type. Choosing the right ping pong paddle is basically essential as a result of it tremendously improves your taking part in efficiency. This Mini Ping Pong Table will provide years of playing enjoyment! Most ping pong tables manufactured right this moment actually offers the feature the place it may be folded into half. Other than being able to reinforce your abilities, good tables also affords you one of the best expertise of having fun with the sport. Thus, it's always greatest suggested to purchase your paddle to an precise sport store. And as for the imply time, chances are you'll select to use any peculiar paddle. This time, it's essential to soak it on a plain clean water. Another vital factor that it's good to know about is that, your pal's paddle may not be suitable to your taking part in fashion. People had been also really proud of how relatively straightforward this was to setup and get to enjoying on supply. As you go deeper into the pool, it's going to turn into tougher to serve and return the balls, so you're going to get your exercise while you're staying cool.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; A security latch keeps the desk from unfolding unexpectedly, and there are rubber leg levelers on the bottom that will help you get it situated. A cat of USA returned again alone from New York to its proprietor's new home in California after strolling a distance of two thousand three hundred miles with none assist. We discover a few of a very powerful that will help you understand what desk prime is likely to be right for you. Tennis Tutor [https://www.freightpros.com ProLite] Plus, which as well as to those features, has a topspin button, wheels and handle for straightforward transport, a 4 hour battery life, and a top velocity of seventy five miles per hour. Upon knowing the great significance of a ping pong paddle, don't instantly go out to the store to buy any a kind of very expensive paddles much like these being used by the top professional gamers. The youngsters enjoyed the campground store and the video video games, and ice cream. There may be a really excessive competition of ping pong paddle as merchandise out in the market in the present day. And as stated above, it is best to decide on those Natural sort of cleansing products.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If you liked this short article and you would like to get much more info with regards to [https://www.kijiji.ca/b-ontario/ping-pong-top-for-pool-table/k0l9004 Ping Pong Top For Pool Table] kindly stop by the webpage.&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Water_Distiller_-_Tools_And_Gear&amp;diff=261622</id>
		<title>Water Distiller - Tools And Gear</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Water_Distiller_-_Tools_And_Gear&amp;diff=261622"/>
				<updated>2020-12-23T10:10:59Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: Created page with &amp;quot;&amp;lt;br&amp;gt; The Pure Water Model Mini-Traditional CT is a compact, countertop water distiller that produces high-purity, great-tasting distilled water. If you end up shopping for any...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&amp;lt;br&amp;gt; The Pure Water Model Mini-Traditional CT is a compact, countertop water distiller that produces high-purity, great-tasting distilled water. If you end up shopping for any product of the water distillers, then it is way necessary to be conscious concerning the model title as properly so that you simply wont really feel remorse about selecting the low high quality of the product. Within the &amp;quot;one-shot&amp;quot; method, they then add the botanicals to the alcohol and draw out their &amp;quot;essences&amp;quot; by putting them in [https://www.marieclaire.com baskets exposed] to steam. After performing plenty of distillation processes the unit must be cleaned to remove the residue that's left behind as water is became steam. A security shut-off swap turns the unit off ought to it ever overheat. The automated shutoff function will swap off the unit once the distillation process is over or when it exceeds the temperature of 300F. As soon as the water is refilled or the temperature drops beneath 300F, it routinely switches on. This characteristic protects the unit from overheating through the distillation process. All you want to do is pour 4 Litters of water and activate [https://www.gloucestercitynews.net/clearysnotebook/2018/02/cnb-business-news-whats-in-the-neighborhood-fishtown-and-the-river-wards.html click the up coming website] unit.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; For each 5 gallons of tap water, you will have approximately 2 to 5 hours of processing just to provide a gallon of distilled water. At Vinn Distillery, in Wilsonville, Oregon, 5 siblings make the only U.S. The vacuum freezing is still being developed to make it more effective in the desalination course of. The overwhelming majority of those chemicals should not regulated, so even when the government says that your water is safe, your water could still contain harmful contaminants. The jury remains to be out as to whether doing without the vital minerals in drinking water (like calcium and magnesium) is dangerous to your health. Additionally, with added features like overheat safety and auto shut off, product longevity is assured. With it comes the satisfaction of offering the necessary protection in [https://kirbiecravings.com opposition] to toxic agents and water borne diseases. The unit additionally has a fuse that provides final safety to this water distiller. Finest water distiller is the one that's carried out with the high-high quality ending of designing and with the durable set of the features being part of it. Regardless of being competitively priced, it works exceptionally well.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; This handy dispenser comes with a handle and pour-through lid, and is used to collect the distilled water. In case you are on a tight price range then this 4-liter water distiller will are available in useful for you. This firm provides water distiller machines in USA and Canada. Made in the USA! · Made in the Lincoln NE USA. You will like the truth that the machine stays quiet whereas it is operating. However, the good thing is that the distilled water hardly comes involved with plastic throughout the distillation course of whereas utilizing this unit. Whereas in operation, the top of the unit must be clear of any obstruction to permit for correct air circulation. Counter top distillers are additionally very simple to use and requires no set up in any respect. Emergency workers arrived at the 2-story dwelling to seek out the mudslide had knocked the primary ground from its foundations and precipitated the second ground to collapse on prime of it, Stanton Fire Department Assistant Chief Eddie Barnes stated. And I—aware that I used to be representing my nation’s reputation, keen to be polite, and secretly, more and more fond of the liquid—would ensure that I knocked these again with a smile. The unit also is fitted with stainless steel cooling coils which can be effective in condensing the steam back to scrub and ready to drink distilled water.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; There might be undetected contaminants in every glass you drink having a cumulative have an effect on on your well being for the worse. Included in the pack is a glass carafe, a jar of non-toxic cleaning crystals, 6 activated carbon pods, and a detailed instruction guide. The unit has steady self-sterilization when in operation and is equipped with a removable boiling tank for simple filling and cleansing. A removable boiling chamber allowing for straightforward filling and cleansing. This unit also lacks a collection chamber. The stainless steel does not solely switch heat to the steam chamber but in addition makes this unit one of the easiest water distillers to clean. And the perfect strategy to do that's by investing in your health and the health of your family with one among our assured Waterwise purifier/distillers. Distilled water is better than tap water because it is guaranteed to be 100% freed from impurities. It is good to know your health levels and steps must be taken to make it as higher as attainable.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; And there are obvious returns to good health; both emotional and monetary. Most incessantly, the undesirable parts are what you discover naturally in ground or floor water. Sandalwoods are medium-sized timber which rely partially on other species for valuable nutrients and water. Throughout gin right now, makers are incorporating native botanicals—from hand-picked buchu in South Africa’s Western Cape to pink peppercorn found high in the Peruvian Andes. CO-Z Water Distiller has a comparatively excessive circulation fee. There are various advantages that come if you begin using distiller at your home or office. As you'll dig out the search round you'll be stepping forward in getting nearer with so many of the barnds as offering the excellent high quality of the water distillers for the home use. It’s additionally excellent to be used in a camper or RV, or taken to a second residence for distilled water enjoyment away from dwelling. That’s why it’s so important you make doubly positive the water you drink is 100% steam distilled.&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=10_Finest_Outside_Ping_Pong_Tables_2020&amp;diff=261515</id>
		<title>10 Finest Outside Ping Pong Tables 2020</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=10_Finest_Outside_Ping_Pong_Tables_2020&amp;diff=261515"/>
				<updated>2020-12-22T02:49:37Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: Created page with &amp;quot;&amp;lt;br&amp;gt; Alternatively, an astronaut on Jupiter will expertise an acceleration of about 2.5g m/s2, therefore jumping in the air will likely be severely restricted in terms of peak...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&amp;lt;br&amp;gt; Alternatively, an astronaut on Jupiter will expertise an acceleration of about 2.5g m/s2, therefore jumping in the air will likely be severely restricted in terms of peak reached. For example, the gravitational acceleration on Jupiter is 24.8 m/s2, which is 2.5g, or 2.5 times higher than Earth’s gravitational acceleration. It is as a result of exterior forces diminish the effects of the gravitational acceleration. Within the absence of exterior forces reminiscent of friction and air resistance, objects will take the same amount of time to achieve the ground. Donic Clip Internet Units are blue and easy to set up as a result of it has the identical quality, height, and tension adjustable options. These are nice methods to maintain a person enterprise. That’s a really particular business. You should have heads up on where the ball will likely be returned to. The random (RND) mode makes ball placement less robotic and more human-like for a practical coaching or taking part in expertise.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; Taking part in the same few board games simply won’t reduce it when you want a extra full-body gaming experience. Throughout the Summers off from faculty, I performed board games day by day with my brother. I did manage to accomplish a few duties reminiscent of organizing closets that in all probability would not have been executed for months and we did play board video games and that i read a lot as advised. The desk board is a necessary part of a ping pong table. There can also be a broad miscellany of full-dimension [https://www.costway.com/removable-foldable-net-table-tennis-table-with-locking-casters.html ping] pong tables that folks can make according to their own use and interest. It's time we make thanksgiving an necessary part of our lives each day. Taking time for even the briefest moment day-after-day to offer thanks makes us see how a lot we really do need to be thankful for. Now’s the proper time to brush him, throw a ball the length of your basement for him to chase, play tug of battle with his toys, and so on. He’ll love you for it and you’ll take pleasure in watching him have a very good time.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; As an illustration, air resistance is larger for the ping pong ball than for the sphere, so gravitational acceleration will likely be less. To help together with your determination, Giftwits presents a rating and evaluations of the very best ping pong tables on the market right this moment. Discover more Mizerak Donovan II Billiard Table (eight Toes) data and opinions here. Make sure you measure the space where you’ll be preserving your table before making a purchase and permit no less than 3 toes further for each facet, and 6 feet at every finish. Begin constructing the second half of the folding ping pong table in the identical means as the primary, however as a substitute of attaching a 49 1/2-inch face board on the third pocket-gap aspect, attach the 32 7/8-inch board and go away the final section empty (for now). [https://www.gloucestercitynews.net/clearysnotebook/2018/02/cnb-business-news-whats-in-the-neighborhood-fishtown-and-the-river-wards.html the advantage] Ping Pong On the spot Table Tennis Table has an expandable body that collapses in seconds for straightforward storing. As a result of however great it's compared to the RS Barcelona Ping Pong Table it's going to pale as compared.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; LI-NING’s SS20 collection takes cues from the sport, tweaking types as familiar to tennis masters as ping pong specialists. A ten [https://www.independent.co.uk kilogram] (22 pound) steel sphere and a 3 gram (0.1 ounce) ping pong ball [https://www.pinterest.ca/pin/455145106082532629/ are] dropped from a skyscraper. The racket strikes the ball frankly by transferring perpendicular to the trajectory of the ball. However why, then, does the steel ball reach the bottom first? Discover that if Javier made his leap on Pluto, he would attain a maximum top of about 40 m, equal to the height of an 8 storey constructing! Is that this equivalent to dieting taken to its extreme? On the moon, the gravitational drive on an individual of mass 72 kg means the load will probably be approximately 1/6 their weight on Earth, or simply 12 kg! There's much less gravitational force exerted on them. He dropped a hammer and a feather, and because there isn't any air resistance or other power, each objects reached the bottom at the identical time.&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Clean_Tech_Promising_But_Difficult_In_The_Creating_World&amp;diff=261273</id>
		<title>Clean Tech Promising But Difficult In The Creating World</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Clean_Tech_Promising_But_Difficult_In_The_Creating_World&amp;diff=261273"/>
				<updated>2020-12-20T19:23:09Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: Created page with &amp;quot;&amp;lt;br&amp;gt; Before the Islamic Golden Age, people worldwide used crude strategies of distillation, similar to leaving booze out in the cold and drinking what wouldn’t freeze. He wa...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&amp;lt;br&amp;gt; Before the Islamic Golden Age, people worldwide used crude strategies of distillation, similar to leaving booze out in the cold and drinking what wouldn’t freeze. He was born a century after Jabir’s demise, in the midst of the Islamic Golden Age, and he was each a fellow alchemist and a pioneering physician who wrote clinically about smallpox. Originally, Phan wished to call the distillery &amp;quot;Five Siblings,&amp;quot; for his youngsters, however they convinced him to go for the &amp;quot;Vinn&amp;quot; moniker as an alternative: the shared middle identify of the siblings, all of whom work for the distillery not directly. Eau de vie is still the French title for brandy, and even the phrase &amp;quot;brandy&amp;quot; hides a clue to its distillation: It’s derived from the Dutch word brandewijn, or burnt wine. The gin-as-spirit craze didn’t actually kick off until William III became King of England in 1689. He banned brandy, the drink of selection, and started offering tax advantages to British citizens who distilled their very own spirits. The &amp;quot;concentrate&amp;quot; technique, however, distills the botanicals individually with a small quantity of water earlier than mixing with distilled alcohol and water. The potentialities of the types of flavorings are nearly limitless, and provide a ton of flavor with out changing the texture of the food into which you're mixing them.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; Some of Ly’s first-time clients, in contrast, are taken aback or have &amp;quot;negative&amp;quot; reactions on the primary sip, says Ly. &amp;quot;We couldn’t get our fingers on it,&amp;quot; says Ly. And to get the very small quantity of fine minerals which may be contained in the water, you need to drink all the Bad minerals and all the opposite pollution and contaminants together with it. You possibly can search the net with the time period water distiller USA or water distiller Canada and get full particulars. This firm offers water distiller machines in USA and Canada. The distiller said it was grateful to the 'courageous firefighters' who brought the blaze under management and stored it from spreading. Ly is likely one of the five siblings who personal Vinn Distillery. It’s not known who first had the vibrant thought of drinking the spirits Jabir made. But the Abbasids quickly triumphed, and Jabir served as courtroom alchemist to the caliph, Harun Al-Rashid.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; They say that water distillers are so efficient in [https://toywiz.com purifying water] that they also remove the minerals which are within the water. It’s like telling folks to go eat a handful of dirt as a result of it might also include a few good minerals. Should you want higher drinking water, I would instead recommend a a number of stage reverse osmosis below the kitchen sink or even better, a whole-home resolution. As we speak, it’s solely gotten more so: Even as alcohol consumption took a worldwide dip from 2017 to 2018, gin’s world consumption grew 8.Three p.c, in keeping with a 2019 report from Worldwide Wine and Spirits Research (IWSR). That condensation, which is the essence of the distilled materials, turned known as the &amp;quot;spirit.&amp;quot; Since alcohol has a lower boiling level than water, heating wine in an [https://www.steinberg.net alembic] nonetheless causes alcohol to evaporate first, separating it from the water. [https://www.gloucestercitynews.net/clearysnotebook/2018/02/cnb-business-news-whats-in-the-neighborhood-fishtown-and-the-river-wards.html click this] condensation causes contaminants to be separated from the water. First off, before you purchase any water filtration system, it's worthwhile to know what drinking water contaminants you want to take away and find a suitable water filtration technology to take away it.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; Everybody realizes that tap water is loaded with many varieties of suspended pollutants, chemicals, toxins and different contaminants. In fact there isn't any &amp;quot;taste&amp;quot; in any respect because there isn’t anything in the water to style in the primary place. There isn't any need to purchase a water filter for each tap. The water is adjusted to a mild alkaline pH for a smoother style and a healthier water. In keeping with the corporate's website, TerrePure makes use of ultrasound, heat and oxygen to eradicate &amp;quot;harsh-tasting impurities current in all spirits&amp;quot; to reveal &amp;quot;the nice style and aroma&amp;quot; that folks need. And figuring out the appropriate business model is tough because folks at the underside of the financial pyramid do not necessarily want handouts, but they can not pay excessive upfront charges either. Now, a brand new breed of small craft distilleries is trying to take the years out of aging. His plans to promote eco-friendly house kits that might be inbuilt a day to final 100 years acquired a boost from the mayor the place the first challenge will launch in Mexico, he mentioned. I take 10min every night time to organize water for the next day.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt; By having only one wholehouse water filter, you solely want to remember to change one filter. Truth: H2o Labs Water distillation systems, particularly our counter-prime water distiller, are so inexpensive that it is Extra Costly Not to HAVE ONE. However all these historic-yet-familiar beverages are fairly low proof. Tap water aint that clear but there are filters to cut back plastic bottle use. It is often mentioned in advocacy circles and environmental teams that countries with lower residing requirements face essentially the most hardships when it comes to clean water. Nothing can &amp;quot;taste&amp;quot; as clean and pure as distilled water when it’s made recent and saved appropriately for future use. The water purification system doesn't use membranes, filters, or different conventional strategies, however quite depends on electricity to run a vapor compression distiller that can treat very soiled water. Additionally, when water filtering programs turn out to be clogged and neglected they will turn into breeding grounds for bacteria.&amp;lt;br&amp;gt;&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=User:HunterCrv5&amp;diff=261272</id>
		<title>User:HunterCrv5</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=User:HunterCrv5&amp;diff=261272"/>
				<updated>2020-12-20T19:23:04Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: Created page with &amp;quot;My name is Dominique Mennell but everybody calls me [https://www.riteaid.com Dominique]. I'm from Italy. I'm studying at the university (2nd year) and I play the Harp for 5 ye...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;My name is Dominique Mennell but everybody calls me [https://www.riteaid.com Dominique]. I'm from Italy. I'm studying at the university (2nd year) and I play the Harp for 5 years. Usually I choose songs from my famous films ;). &amp;lt;br&amp;gt;I have two sister. I like Fishkeeping, watching movies and People watching.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Visit my web page; [https://www.gloucestercitynews.net/clearysnotebook/2018/02/cnb-business-news-whats-in-the-neighborhood-fishtown-and-the-river-wards.html moved here]&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=File:Ginkgo3_Bootloader.png&amp;diff=432</id>
		<title>File:Ginkgo3 Bootloader.png</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=File:Ginkgo3_Bootloader.png&amp;diff=432"/>
				<updated>2020-10-27T03:46:43Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=428</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=428"/>
				<updated>2020-10-27T03:28:21Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线与Ginkgo3 SPI Slave适配器通讯&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==操作流程==&lt;br /&gt;
&lt;br /&gt;
1.GinkgoBootloader 查看版本信息.确定设备当前索引号&lt;br /&gt;
&lt;br /&gt;
SPI Master 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
SPI Slave 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2.SPI Extend 主从配置表&lt;br /&gt;
&lt;br /&gt;
SPI Master:&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI&amp;amp;I2C Bootloader.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
SPI Slave:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3.主机发送数据从机接收&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4.主机接收数据从机发送&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5.当从机再次接收的时候会出现( 多出来的数据是正常的)&lt;br /&gt;
原因是:(当主机读取数据的时候会发送8个无效数据到从机,这个过程被从机记录下来了所以当从机再次读取的时候会出现8个无效数据)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
高级事项&lt;br /&gt;
&lt;br /&gt;
※当主机不断读取从机数据..从机连续写出数据..这个时候软件会爆出从机写出失败&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
主机只能通过单步运行模式读取从机发送的数据&lt;br /&gt;
&lt;br /&gt;
※当主机连续写入数据从机连续读取这些数据运行正常.目前只能在这个时钟下(18000000)&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=427</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=427"/>
				<updated>2020-10-27T03:25:01Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线与Ginkgo3 SPI Slave适配器通讯&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==操作流程==&lt;br /&gt;
&lt;br /&gt;
1.GinkgoBootloader 查看版本信息.确定设备当前索引号&lt;br /&gt;
&lt;br /&gt;
SPI Master 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
SPI Slave 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2.SPI Extend 主从配置表&lt;br /&gt;
&lt;br /&gt;
SPI Master:&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI&amp;amp;I2C Bootloader.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
SPI Slave:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3.主机发送数据从机接收&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4.主机接收数据从机发送&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5.当从机再次接收的时候会出现( 多出来的数据是正常的)&lt;br /&gt;
原因是:(当主机读取数据的时候会发送8个无效数据到从机,这个过程被从机记录下来了所以当从机再次读取的时候会出现8个无效数据)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
高级事项&lt;br /&gt;
※当主机不断读取从机数据..从机连续写出数据..这个时候软件会爆出从机写出失败&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
主机只能通过单步运行模式读取从机发送的数据&lt;br /&gt;
&lt;br /&gt;
※当主机连续写入数据从机连续读取这些数据运行正常.目前只能在这个时钟下(18000000)&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=426</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=426"/>
				<updated>2020-10-27T03:24:39Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;=测试的功能介绍=&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线与Ginkgo3 SPI Slave适配器通讯&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==操作流程==&lt;br /&gt;
&lt;br /&gt;
1.GinkgoBootloader 查看版本信息.确定设备当前索引号&lt;br /&gt;
&lt;br /&gt;
SPI Master 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
SPI Slave 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2.SPI Extend 主从配置表&lt;br /&gt;
&lt;br /&gt;
SPI Master:&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI&amp;amp;I2C Bootloader.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
SPI Slave:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3.主机发送数据从机接收&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4.主机接收数据从机发送&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5.当从机再次接收的时候会出现( 多出来的数据是正常的)&lt;br /&gt;
原因是:(当主机读取数据的时候会发送8个无效数据到从机,这个过程被从机记录下来了所以当从机再次读取的时候会出现8个无效数据)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
高级事项&lt;br /&gt;
※当主机不断读取从机数据..从机连续写出数据..这个时候软件会爆出从机写出失败&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
主机只能通过单步运行模式读取从机发送的数据&lt;br /&gt;
&lt;br /&gt;
※当主机连续写入数据从机连续读取这些数据运行正常.目前只能在这个时钟下(18000000)&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=425</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=425"/>
				<updated>2020-10-27T03:23:01Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: /* 测试的功能介绍 */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线与Ginkgo3 SPI Slave适配器通讯&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==操作流程==&lt;br /&gt;
&lt;br /&gt;
1.GinkgoBootloader 查看版本信息.确定设备当前索引号&lt;br /&gt;
&lt;br /&gt;
SPI Master 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
SPI Slave 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2.SPI Extend 主从配置表&lt;br /&gt;
&lt;br /&gt;
SPI Master:&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI&amp;amp;I2C Bootloader.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
SPI Slave:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3.主机发送数据从机接收&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4.主机接收数据从机发送&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5.当从机再次接收的时候会出现( 多出来的数据是正常的)&lt;br /&gt;
原因是:(当主机读取数据的时候会发送8个无效数据到从机,这个过程被从机记录下来了所以当从机再次读取的时候会出现8个无效数据)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
高级事项&lt;br /&gt;
※当主机不断读取从机数据..从机连续写出数据..这个时候软件会爆出从机写出失败&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
主机只能通过单步运行模式读取从机发送的数据&lt;br /&gt;
&lt;br /&gt;
※当主机连续写入数据从机连续读取这些数据运行正常.目前只能在这个时钟下(18000000)&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=423</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=423"/>
				<updated>2020-10-27T03:03:12Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线不断发送Ginkgo3 SPI Slave适配器&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==操作流程==&lt;br /&gt;
&lt;br /&gt;
1.GinkgoBootloader 查看版本信息.确定设备当前索引号&lt;br /&gt;
&lt;br /&gt;
SPI Master 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
SPI Slave 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2.SPI Extend 主从配置表&lt;br /&gt;
&lt;br /&gt;
SPI Master:&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI&amp;amp;I2C Bootloader.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
SPI Slave:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3.主机发送数据从机接收&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4.主机接收数据从机发送&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5.当从机再次接收的时候会出现( 多出来的数据是正常的)&lt;br /&gt;
原因是:(当主机读取数据的时候会发送8个无效数据到从机,这个过程被从机记录下来了所以当从机再次读取的时候会出现8个无效数据)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
高级事项&lt;br /&gt;
※当主机不断读取从机数据..从机连续写出数据..这个时候软件会爆出从机写出失败&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
主机只能通过单步运行模式读取从机发送的数据&lt;br /&gt;
&lt;br /&gt;
※当主机连续写入数据从机连续读取这些数据运行正常.目前只能在这个时钟下(18000000)&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=File:SPI%26I2C_Bootloader.png&amp;diff=422</id>
		<title>File:SPI&amp;I2C Bootloader.png</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=File:SPI%26I2C_Bootloader.png&amp;diff=422"/>
				<updated>2020-10-27T03:01:35Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: Jerry uploaded a new version of File:SPI&amp;amp;I2C Bootloader.png&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;1&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=421</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=421"/>
				<updated>2020-10-27T03:00:40Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线不断发送Ginkgo3 SPI Slave适配器&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==操作流程==&lt;br /&gt;
&lt;br /&gt;
1.GinkgoBootloader 查看版本信息.确定设备当前索引号&lt;br /&gt;
&lt;br /&gt;
SPI Master 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
SPI Slave 设备:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2.SPI Extend 主从配置表&lt;br /&gt;
&lt;br /&gt;
SPI Master:&lt;br /&gt;
&lt;br /&gt;
[[File:SPI&amp;amp;I2C Bootloader.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
SPI Slave:&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3.主机发送数据从机接收&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4.主机接收数据从机发送&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5.当从机再次接收的时候会出现( 多出来的数据是正常的)&lt;br /&gt;
原因是:(当主机读取数据的时候会发送8个无效数据到从机,这个过程被从机记录下来了所以当从机再次读取的时候会出现8个无效数据)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
高级事项&lt;br /&gt;
※当主机不断读取从机数据..从机连续写出数据..这个时候软件会爆出从机写出失败&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
主机只能通过单步运行模式读取从机发送的数据&lt;br /&gt;
&lt;br /&gt;
※当主机连续写入数据从机连续读取这些数据运行正常.目前只能在这个时钟下(18000000)&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=File:SPI%26I2C_Bootloader.png&amp;diff=420</id>
		<title>File:SPI&amp;I2C Bootloader.png</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=File:SPI%26I2C_Bootloader.png&amp;diff=420"/>
				<updated>2020-10-27T03:00:31Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;1&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=413</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=413"/>
				<updated>2020-10-27T01:41:04Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线不断发送Ginkgo3 SPI Slave适配器&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
操作流程&lt;br /&gt;
1.使用Gingo Bootloader 查看设备的版本信息&lt;br /&gt;
&lt;br /&gt;
[[Image:GinkgoBootloaderFirmwareInfo.png]]&lt;br /&gt;
&lt;br /&gt;
确定设备索引号后&lt;br /&gt;
&lt;br /&gt;
2.打开SPI_Extend上位机软件&lt;br /&gt;
&lt;br /&gt;
主机配置如下:&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=412</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=412"/>
				<updated>2020-10-27T01:40:34Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: /* Test Tool */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线不断发送Ginkgo3 SPI Slave适配器&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI Extend&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
操作流程&lt;br /&gt;
1.使用Gingo Bootloader 查看设备的版本信息&lt;br /&gt;
&lt;br /&gt;
[[Image:GinkgoBootloaderFirmwareInfo.png]]&lt;br /&gt;
&lt;br /&gt;
确定设备索引号后&lt;br /&gt;
&lt;br /&gt;
2.打开SPI_Extend上位机软件&lt;br /&gt;
主机配置如下:&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=411</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=411"/>
				<updated>2020-10-27T01:37:54Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线不断发送Ginkgo3 SPI Slave适配器&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
操作流程&lt;br /&gt;
1.使用Gingo Bootloader 查看设备的版本信息&lt;br /&gt;
&lt;br /&gt;
[[Image:GinkgoBootloaderFirmwareInfo.png]]&lt;br /&gt;
&lt;br /&gt;
确定设备索引号后&lt;br /&gt;
&lt;br /&gt;
2.打开SPI_Extend上位机软件&lt;br /&gt;
主机配置如下:&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=File:GinkgoBootloaderFirmwareInfo.png&amp;diff=410</id>
		<title>File:GinkgoBootloaderFirmwareInfo.png</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=File:GinkgoBootloaderFirmwareInfo.png&amp;diff=410"/>
				<updated>2020-10-27T01:20:26Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=407</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=407"/>
				<updated>2020-10-26T11:33:33Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==测试的功能介绍==&lt;br /&gt;
&lt;br /&gt;
Ginkgo2 SPI Master 适配器通过SPI总线不断发送Ginkgo3 SPI Slave适配器&lt;br /&gt;
&lt;br /&gt;
==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=406</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=406"/>
				<updated>2020-10-26T10:53:47Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: /* SPI Slave Configure */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (测试单次接收速度成功)(同时收发尚未测试)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=405</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=405"/>
				<updated>2020-10-26T10:49:13Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(SPI可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (SPI)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=404</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=404"/>
				<updated>2020-10-26T10:48:40Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: /* Test Tool */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
SPI Extend&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(SPI可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (SPI)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=402</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=402"/>
				<updated>2020-10-26T10:42:56Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[Image:SPI_Extend_Master.png]]&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(SPI可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (SPI)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=401</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=401"/>
				<updated>2020-10-26T10:38:58Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
[[File:QQ截图20201026184121.png|thumb]]&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(SPI可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (SPI)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=399</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=399"/>
				<updated>2020-10-26T10:35:08Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	(SPI可以同时收发)	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	(单次只能接收或者发送) 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	(单次只能接收或者发送)	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Hardware control Fast Read 	||      (SPI)    &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=398</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=398"/>
				<updated>2020-10-26T10:12:26Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	 	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Fast Read Mode	                ||	TW(Pro) 	      &lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Master Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	Slave  Mode	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Master Mode	||	 	            &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=397</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=397"/>
				<updated>2020-10-26T10:10:30Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Debug Setting==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==Test Tool==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	 	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Fast Read Mode	                ||	TW(Pro) 	      &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=396</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=396"/>
				<updated>2020-10-26T10:09:10Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :[http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html]&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	 	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Fast Read Mode	                ||	TW(Pro) 	      &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=395</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=395"/>
				<updated>2020-10-26T10:06:24Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	 	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Fast Read Mode	                ||	TW(Pro) 	      &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=394</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=394"/>
				<updated>2020-10-26T10:04:50Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	 	        &lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	 	       &lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	      &lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Fast Read Mode	                ||	 	      &lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=393</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=393"/>
				<updated>2020-10-26T10:04:20Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	0	||	hardware control(full duplex) 	||	 	        ||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	hardware control(half duplex) 	||	 	        ||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	software control(half duplex)   ||	 	        ||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	one wire mode	                ||	 	        ||&lt;br /&gt;
|-												&lt;br /&gt;
|	50	||	Fast Read Mode	                ||	 	        ||&lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=392</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=392"/>
				<updated>2020-10-26T10:00:36Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Pins 	||	Clock range	||	Operation Requirement	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Normal Slave Write	||	4	||	36000000	||	After everytime writing, master reading required 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	Normal Slave Read	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	Normal 	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	4	||	Special full speed	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=391</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=391"/>
				<updated>2020-10-26T09:59:38Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Control Mode 	||	Mode Description	||	Pins 	||	Clock range	||	Operation Requirement	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Normal Slave Write	||	4	||	36000000	||	After everytime writing, master reading required 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	Normal Slave Read	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	Normal 	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	4	||	Special full speed	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=390</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=390"/>
				<updated>2020-10-26T09:56:09Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Example Code Project Name:Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Hardware Connection==&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;br /&gt;
&lt;br /&gt;
==SPI Slave Configure==&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Slave Mode 	||	Mode Description	||	Pins 	||	Clock range	||	Operation Requirement	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Normal Slave Write	||	4	||	36000000	||	After everytime writing, master reading required 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	Normal Slave Read	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	Normal 	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	4	||	Special full speed	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
1.download example code&lt;br /&gt;
&lt;br /&gt;
application example:http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Application Example:&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter reading and writing control &lt;br /&gt;
&lt;br /&gt;
2.struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
4.SPI_Config.MasterMode = 0;&lt;br /&gt;
&lt;br /&gt;
5.SPI_Config.ControlMode = 50; &lt;br /&gt;
&lt;br /&gt;
//SPI control mode: 0-&amp;gt;hardware control(full duplex) 1-&amp;gt;hardware control(half duplex) 2-&amp;gt;software control(half duplex) 50-&amp;gt;fast read mode&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=389</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=389"/>
				<updated>2020-10-26T09:45:47Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==调试环境==&lt;br /&gt;
&lt;br /&gt;
IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Master:Ginkgo2 SPI Adaptor&lt;br /&gt;
&lt;br /&gt;
Hardware SPI Slave :Ginkgo3 Adaptor&lt;br /&gt;
&lt;br /&gt;
==测试工具==&lt;br /&gt;
&lt;br /&gt;
Master:SPI Extend (SendData)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/22-2016-07-29-02-11-32/26-ginkgo-usb-spi&lt;br /&gt;
&lt;br /&gt;
Ginkgo One&lt;br /&gt;
&lt;br /&gt;
Slave:SPI SlaveRead(VS2010 Example Code)&lt;br /&gt;
&lt;br /&gt;
http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
==Normal Slave Write==&lt;br /&gt;
=='''Normal Slave Write'''==&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Slave Mode 	||	Mode Description	||	Pins 	||	Clock range	||	Operation Requirement	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Normal Slave Write	||	4	||	36000000	||	After everytime writing, master reading required 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	Normal Slave Read	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	Normal 	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	4	||	Special full speed	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	 	||	 	||	 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	 	||	 	||	 	||	 	||&lt;br /&gt;
|-											 	&lt;br /&gt;
|		||	 	||	 	||	 	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	 	||	 	||	 	||	  	||	 	||&lt;br /&gt;
|-											 	&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
1.download example code&lt;br /&gt;
&lt;br /&gt;
application example:http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Application Example:&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter reading and writing control &lt;br /&gt;
&lt;br /&gt;
2.struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
4.SPI_Config.MasterMode = 0;&lt;br /&gt;
&lt;br /&gt;
5.SPI_Config.ControlMode = 50; &lt;br /&gt;
&lt;br /&gt;
//SPI control mode: 0-&amp;gt;hardware control(full duplex) 1-&amp;gt;hardware control(half duplex) 2-&amp;gt;software control(half duplex) 50-&amp;gt;fast read mode &lt;br /&gt;
&lt;br /&gt;
master:&lt;br /&gt;
&lt;br /&gt;
ginkgo2 spi adaptor(SPI Extend)&lt;br /&gt;
&lt;br /&gt;
slave:&lt;br /&gt;
&lt;br /&gt;
ginkgo3 adaptor(VS2010)&lt;br /&gt;
&lt;br /&gt;
Hardware Connection&lt;br /&gt;
&lt;br /&gt;
Master SPI Moder -&amp;gt; Slave SPI Moder&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=388</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=388"/>
				<updated>2020-10-26T09:29:49Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;==Normal Slave Write==&lt;br /&gt;
==Normal Slave Write==&lt;br /&gt;
==Normal Slave Write==&lt;br /&gt;
=='''Normal Slave Write'''==&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Slave Mode 	||	Mode Description	||	Pins 	||	Clock range	||	Operation Requirement	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Normal Slave Write	||	4	||	36000000	||	After everytime writing, master reading required 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	Normal Slave Read	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	Normal 	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	4	||	Special full speed	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	 	||	 	||	 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	 	||	 	||	 	||	 	||&lt;br /&gt;
|-											 	&lt;br /&gt;
|		||	 	||	 	||	 	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	 	||	 	||	 	||	  	||	 	||&lt;br /&gt;
|-											 	&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
1.download example code&lt;br /&gt;
&lt;br /&gt;
application example:http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Application Example:&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter reading and writing control &lt;br /&gt;
&lt;br /&gt;
2.struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
3.IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
4.SPI_Config.MasterMode = 0;&lt;br /&gt;
&lt;br /&gt;
5.SPI_Config.ControlMode = 50; &lt;br /&gt;
&lt;br /&gt;
//SPI control mode: 0-&amp;gt;hardware control(full duplex) 1-&amp;gt;hardware control(half duplex) 2-&amp;gt;software control(half duplex) 50-&amp;gt;fast read mode &lt;br /&gt;
&lt;br /&gt;
master:&lt;br /&gt;
&lt;br /&gt;
ginkgo2 spi adaptor(SPI Extend)&lt;br /&gt;
&lt;br /&gt;
slave:&lt;br /&gt;
&lt;br /&gt;
ginkgo3 adaptor(VS2010)&lt;br /&gt;
&lt;br /&gt;
Hardware Connection&lt;br /&gt;
&lt;br /&gt;
Master SPI Moder -&amp;gt; Slave SPI Moder&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	<entry>
		<id>http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=387</id>
		<title>Spi Slave Mode</title>
		<link rel="alternate" type="text/html" href="http://www.viewtool.com/wiki/index.php?title=Spi_Slave_Mode&amp;diff=387"/>
				<updated>2020-10-26T09:29:35Z</updated>
		
		<summary type="html">&lt;p&gt;HunterCrv5: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;&lt;br /&gt;
&lt;br /&gt;
==Normal Slave Write==&lt;br /&gt;
==Normal Slave Write==&lt;br /&gt;
==Normal Slave Write==&lt;br /&gt;
=='''Normal Slave Write'''==&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|	Slave Mode 	||	Mode Description	||	Pins 	||	Clock range	||	Operation Requirement	||	Comments	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|-												&lt;br /&gt;
|	1	||	Normal Slave Write	||	4	||	36000000	||	After everytime writing, master reading required 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	2	||	Normal Slave Read	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	3	||	Normal 	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	4	||	Special full speed	||	4	||	36000000	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	 	||	 	||	 	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	  	||	 	||	 	||	 	||	 	||&lt;br /&gt;
|-											 	&lt;br /&gt;
|		||	 	||	 	||	 	||	  	||	 	||&lt;br /&gt;
|-												&lt;br /&gt;
|	  	||	 	||	 	||	 	||	  	||	 	||&lt;br /&gt;
|-											 	&lt;br /&gt;
|	  	||	  	||	  	||	  	||	  	||	  	||&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
1.download example code&lt;br /&gt;
&lt;br /&gt;
application example:http://www.viewtool.com/index.php/en/26-2016-07-29-02-13-28/42-ginkgo-usb-spi-4&lt;br /&gt;
&lt;br /&gt;
Application Example:&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter slave mode control test&lt;br /&gt;
&lt;br /&gt;
Ginkgo Adapter reading and writing control &lt;br /&gt;
&lt;br /&gt;
2.struct define :http://www.viewtool.com/demo/STM32/Ficus_document_html/d1/df9/struct__VSI__INIT__CONFIG.html &lt;br /&gt;
&lt;br /&gt;
3.IDE: VS2010 (or above)&lt;br /&gt;
&lt;br /&gt;
4.SPI_Config.MasterMode = 0;&lt;br /&gt;
&lt;br /&gt;
5.SPI_Config.ControlMode = 50; &lt;br /&gt;
&lt;br /&gt;
//SPI control mode: 0-&amp;gt;hardware control(full duplex) 1-&amp;gt;hardware control(half duplex) 2-&amp;gt;software control(half duplex) 50-&amp;gt;fast read mode &lt;br /&gt;
&lt;br /&gt;
master:&lt;br /&gt;
&lt;br /&gt;
ginkgo2 spi adaptor(SPI Extend)&lt;br /&gt;
&lt;br /&gt;
slave:&lt;br /&gt;
&lt;br /&gt;
ginkgo3 adaptor(VS2010)&lt;br /&gt;
&lt;br /&gt;
Hardware Connection&lt;br /&gt;
&lt;br /&gt;
Master SPI Moder -&amp;gt; Slave SPI Moder&lt;br /&gt;
&lt;br /&gt;
Ginkgo3 pin number&lt;br /&gt;
&lt;br /&gt;
  Ginkgo2        Ginkgo3 &lt;br /&gt;
&lt;br /&gt;
11-SPI_SEL0 ----&amp;gt; 11-SPI_SEL0&lt;br /&gt;
&lt;br /&gt;
13-SPI_SCK  ----&amp;gt; 13-SPI_SCK  &lt;br /&gt;
&lt;br /&gt;
15-SPI_MISO ----&amp;gt; 15-SPI_MISO &lt;br /&gt;
&lt;br /&gt;
17-SPI_MOSI ----&amp;gt; 17-SPI_MOSI&lt;/div&gt;</summary>
		<author><name>HunterCrv5</name></author>	</entry>

	</feed>